| Code: | 3E35 |
| Barcode: | 6002919087138 |
Specially threaded metal screws that are designed to cut threads as they are driven into untapped holes. This large flat head provides better grip. The screw head will be exposed and will not provide a flush finish. |
Can be used as a permanent and non-permanent fastening solution. Includes a Combi Drive head that can be installed with a flat or pozi bit/screwdriver. Used when you don't have access from the rear to install a bolt and nut. Used instead of blind rivets. For the pilot hole: Use a drill bit 1mm thinner than the thickness of the screw when installed to metal that is thinner than 3mm. Use a drill bit 0.5mm thinner than the screw for metal that is thicker than 3mm. |
